OHAUS 3000 Serie Manual De Instrucciones página 156

EN-10
2. INSTALLATION
2.1 Unpacking
Unpack the following items:
• Indicator
• AC Adapter
• Mounting Bracket
• Knobs (2)
• Capacity Label Sheet
• Instruction Manual CD
• Warranty Card
• LFT sealing Kit
2.2 External Connections
2.2.1 RS232 interface Cable to the indicator
Connect the optional RS232 cable to the RS232 connector Figure 1-1, item 11).
Pin Connection
1 N/C
2 TXD
3 RXD
4 N/C
5 GND
6 N/C
7 N/C
8 N/C
9 N/C
2.2.2 AC Power
Connect the AC Adapter to the power receptacle (Figure 1-1, item 9), then plug the AC Adapter into an electrical outlet.
2.2.3 Mounting Bracket to the Indicator
Align the mounting bracket over the threaded holes in the side of the indicator and install the knobs. Adjust the indicator to the
desired angle and tighten the knobs.
2
4 1
5 3
9
8 7 6
Figure 2-1. RS232 Pins.
3000 Series Indicators