Publicidad
the power cable, press the button
2: To rewind the power cable, press the button
with one hand and guide the cable with the other
re that it does not whip causing damage.
hand to ensure that it does not whip causing damage.
st container
Emptying dust container
st container at the latest when the sucked in
Empty the dust container at the latest when the sucked in
rt in the dust container has reached the "MAX"
quantity of dirt in the dust container has reached the "MAX"
uction power has dropped.
mark or the suction power has dropped.
he vacuum cleaner and disconnect the plug
1. Switch off the vacuum cleaner and disconnect the plug
from the mains. To do this always pull on the plug and
ns. To do this always pull on the plug and
ble.
not on the cable.
e dust container by pressing the release
2. Release the dust container by pressing the release
button.
st container out of the vacuum cleaner.
3. Lift the dust container out of the vacuum cleaner.
ying the dust container, hold it low over a dustbin.
4.when emptying the dust container, hold it low over a dustbin.
18
with one hand and guide the cable with the other
5. Pull the lock on the cover of dust container. Open the dust
5. Pull the lock on the cover of dust container. Open the dust
container cover and empty the dust into the dustbin.
container cover and empty the dust into the dustbin.
6. close the dust container cover.
6. close the dust container cover.
7 place the dust container onto the cylinder vacuum cleaner.
7 place the dust container onto the cylinder vacuum cleaner.
8 check whether the dust container is securely seated.
8 check whether the dust container is securely seated.
8 check whether the dust container is securely seated.
1. Turn off and unplug cleaner.
1. Turn off and unplug cleaner.
For a rough clean, gently knock over a dustbin.
For a rough clean, gently knock over a dustbin.
5. Place the dust container onto the cylinder vacuum cleaner.
5. Place the dust container onto the cylinder vacuum cleaner.
6. Check whether the dust container is securely seated.
6. Check whether the dust container is securely seated.
before it leaves
before it leaves
the vacuum cleaner. You can clean the exhaust air
the vacuum cleaner. You can clean the exhaust air
1. Switch off the vacuum cleaner and disconnect
1. Switch off the vacuum cleaner and disconnect
the plug from
the plug from
the mains. To do this always pull on the plug and
the mains. To do this always pull on the plug and
not on the cable.
not on the cable.
and allow dry.
and allow dry.
19
Publicidad
