Descargar Imprimir esta página

UFESA AS5350 Orix Manual De Instrucciones página 9

Publicidad

ust be removed from socket-outlet before cleaning
Plug must be removed from socket-outlet before cleaning
ntaining the appliance.
or maintaining the appliance.
This appliance is intended for use at a maximum altitude of
2000m above sea level.
TANT WARNINGS
IMPORTANT WARNINGS
ging in the product, check that your mains voltage is the same as the one indicated on the
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
l.
product label.
onnection cable must not be tangled or wrapped around the product during use. Do not pull on
The mains connection cable must not be tangled or wrapped around the product during use. Do not pull on
on cord in order to unplug it.
the connection cord in order to unplug it.
connect or disconnect the device to the mains with your hands or feet wet. Proceed according
Do not use, connect or disconnect the device to the mains with your hands or feet wet. Proceed according
rvation and cleaning section of this manual for cleaning.
to the conservation and cleaning section of this manual for cleaning.
roduct immediately from the mains in the event of any breakdown or damage and contact an
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an
echnical support service.
authorised Technical support service.
t use or improper handling of the product shall render the warranty null and void. Only an
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
echnical support service centre may carry out repairs on this product.
authorised technical support service centre may carry out repairs on this product.
ce is designed exclusively for domestic use, in no case should be a commercial or industrial
This appliance is designed exclusively for domestic use, in no case should be a commercial or industrial
of misuse or tampering with the product, it will be out of warranty.
use. In case of misuse or tampering with the product, it will be out of warranty.
the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),
Do not use the appliance to vacuum liquids (water, etc), sharp objects (pins, pins, nails, glass, etc),
t objects (matches, cigarettes)
incandescent objects (matches, cigarettes)
ter, printer or photocopier toner, etc.
cement, plaster, printer or photocopier toner, etc.
S.L. disclaims all liability for damages that may occur to people, animals or objects, for the
B&B Trends, S.L. disclaims all liability for damages that may occur to people, animals or objects, for the
nce of these warnings.
non-observance of these warnings.
RING THE VACUUM CLEANER
PREPARING THE VACUUM CLEANER
suction hose in the suction hose port. It must audibly lock into place. To remove the hose, push
1. Insert the suction hose in the suction hose port. It must audibly lock into place. To remove the hose, push
hes on the side of the suction hose and at the same time, pull it out of the suction hose port..
the two catches on the side of the suction hose and at the same time, pull it out of the suction hose port..
telescopic extension tube in the handle. For better seating,
2. Insert the telescopic extension tube in the handle. For better seating,
he tube back and forth in the process. If you would like to remove the telescopic tube at a later
gently turn the tube back and forth in the process. If you would like to remove the telescopic tube at a later
gently turn the tube back and forth in the process. If you would like to remove the telescopic tube at a later
pull it off the handle.
time, simply pull it off the handle.
16
tube to the de-sired length. Let go of the slide lock so that the telescopic tube lock can engage.
tube to the de-sired length. Let go of the slide lock so that the telescopic tube lock can eng
Floor Nozzle
Floor Nozzle
2in1 crevice nozzle
2in1 crevice nozzle
Flip the end piece towards the arrow and the tile nozzle will become
Flip the end piece towards the arrow and the tile nozzle will become
a brush nozzle:.
a brush nozzle:.
• The tile nozzle is suitable for cushions, cleaning the inside of
• The tile nozzle is suitable for cushions, cleaning the inside of
passenger vehicles as well as all nooks and crannies that can't be
passenger vehicles as well as all nooks and crannies that can't be
reached with other nozzles.
reached with other nozzles.
• The brush nozzle is suitable for all uneven objects, furniture,
• The brush nozzle is suitable for all uneven objects, furniture,
Upholstery nozzle
Upholstery nozzle
The upholstery nozzle is suitable for cleaning cushions of all kinds,
The upholstery nozzle is suitable for cleaning cushions of all kinds,
e.g. sofas, car seats etc.
e.g. sofas, car seats etc.
Accessories holder
Accessories holder
The accessories holder can be mounted on the telescoping tube.
The accessories holder can be mounted on the telescoping tube.
You can store the 2in1 crevice nozzle and upholstery nozzle by
You can store the 2in1 crevice nozzle and upholstery nozzle by
clipping them into the accessories holder.
clipping them into the accessories holder.
USE
USE
Vacuum cleaning
Vacuum cleaning
To switch on the device press the foot pedal button
To switch on the device press the foot pedal button
on the casing with your foot
on the casing with your foot
17

Publicidad

loading