Hilti DX 6-GR Manual De Instrucciones Original página 26

Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these operating instructions.
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3 Product-dependent symbols
1.3.1 Symbols
The following symbols are also used:
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.3.2 Obligation symbols
The following obligation symbols are used on the product:
Warning! Observe the instructions.
Wear a hard hat
Wear eye protection
Wear ear protection
1.3.3 Information shown on the display
The following information may be shown on the display:
This symbol indicates the battery's state of charge. When the battery is empty, the maintenance
symbol appears.
The "maintenance" symbol indicates that maintenance is due. It appears after 5 years, when
30,000 fasteners have been driven, or when the battery is empty. Our recommendation: Consult
Hilti Service.
The "fasteners driven" counter indicates when the next service is due. One segment stands for
500 fasteners driven. There are 5 segments in total, representing 2,500 fasteners driven.
This symbol indicates whether Bluetooth is switched on. If the symbol is not shown on the display
then Bluetooth is switched off.
1.4 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product described here complies with the
applicable legislation and standards. A copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-86916 Kaufering, Germany
1.5 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
18 English 2253453
*2253453*