WASHER
DIMENSIONS
28"
(71.2 cm)
39-3/4"
(101 cm)
Front View
*With leveling legs retracted: 39-3/4 (101 cm). / With leveling legs fully extended: 40-5/8 (103.1 cm).
MINIMUM
CLEARANCES
Alcove or Closet
• Rear = 0"*
• Sides = 0"
•
•
• Consideration must be given to provide adequate clearance for installation and service.
• Closet doors must be louvered or otherwise ventilated and have at least 60 square inches (387.1 cm
closet contains both a washer and a dryer, doors must contain a minimum of 120 square inches (774.2 cm
* To enable 0" clearance on the back of the washer, you must use 90° elbow hoses. Otherwise you may require some
additional clearance to avoid rubbing of the hoses against the back wall.
ACCESSORIES:
Order on-line at GEApplianceparts.com, 24 hours a day or by phone at 877.959.8688
during normal business hours.
Part Number
GFR0728SNWW White Riser
GFR0728PNSN
Satin Nickel Riser
GFR0728PNRS
Royal Sapphire Riser
GFR0728PNDG
Diamond Gray Riser
GFR0728PTDS
Black Slate Riser
GFP1528SNWW
White Pedestal
GFP1528PNSN
Satin Nickel Pedestal
GFP1528PNRS
Royal Sapphire
Pedestal
GFP1528PNDG
Diamond Gray Pedestal
GFP1528PTDS
Black Slate Pedestal
GFA28KITN
Stacking Kit for Dryer
over Washer
Follow the Installation Instructions included in the Kit for all clearances and installation requirements.
*With leveling legs retracted. See the WASHER DIMENSIONS section above for legs extension dimensions.
49-3000368 Rev 0
Installation Instructions
Models - PFW950, PFW870:
56-1/2" (143.8 cm)
34" (86.4 cm)
*
Side View
0"
Accessory
Riser:
Models - GFW655, GFW650, GFW550,
GFW510:
0"
0"
0"
Pedestal:
*
46-3/4"
(118.7 cm)
54-1/2" (138.4 cm)
32" (81.3 cm)
Side View
0"
) of open area. If the
2
) of open area.
2
Stacked:
*
55-7/8"
(141.8 cm)
0"
*
79-1/2"
(202 cm)
23