Storage and Service
Service
A variety of Extended Warranty and On-Site Service Programs are also available from
Tripp Lite. For more information on service, visit tripplite.com/support. Before returning
your product for service, follow these steps:
1. Review the installation and operation procedures in this manual to ensure that the
service problem does not originate from a misreading of the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead,
visit tripplite.com/support.
3. If the problem requires service, visit tripplite.com/support and click the Product
Returns link. From here you can request a Returned Material Authorization (RMA)
number, which is required for service. This simple online form will ask for your
unit's model and serial numbers, along with other general purchaser information.
The RMA number, along with shipping instructions, will be e-mailed to you. Any
damages (direct, indirect, special or consequential) to the product incurred during
shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under
warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center
must have transportation charges prepaid. Mark the RMA number on the outside of
the package. If the product is within its warranty period, enclose a copy of your sales
receipt. Return the product for service using an insured carrier to the address given
to you when you request the RMA.
Specifications
Model:
Input Voltage:
Input Frequency:
Input Receptacle:
Output Voltage:
Output Frequency:
Output Capacity (VA):
Output Capacity (Watts):
Output Receptacles:
Communications Ports:
Emergency Power Off (EPO) Port:
SMART700DV
120V or 230V AC (nominal), auto-sensing
50 or 60 Hz, auto-sensing
IEC-320-C14 (Accepts detachable power cords.
Included cord features NEMA 5-15 plug.)
120V AC
50 or 60 Hz
700
450
6 NEMA 5-15R
1 USB, 1 RS-232
1
11