Bosch Nexxt 800 Serie Operacion, Cuidado E Instrucciones Para La Instalacion página 5

ForMassachusetts I nstallations:
1.Installation mustbeperformed byali-
censed plumber orgasfitterlicensed b y
thestate, p rovince o r region where this
appliance i sbeinginstalled.
2. Shut-off v alve mustbea "T"handle
gascock.
3. Flexible g asconnector mustnotbe
longer t han36inches.
Improper connection ofthe
equipment grounding c onductor
canresult i na riskofelectric s hock.
Check witha qualified e lectrician or
service p erson ifyouareindoubtas
towhether thedryer i s properly
grounded.
DONOT modify theplugprovided
withtheappliance - ifitwillnotfit
theoutlet h ave a proper o utlet
installed b ya qualified e lectrician or
exchange thecordwithan
appropriate oneratedforthedryer.
KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
In case of change of ownership,
manual should be conveyed with the
dryer.
SAVE THESE INSTRUCTIONS!
INSTALLATION INSTRUCTIONS
Introduction
Read these installation instructions
completely and carefully. They will save
you time and effort and help to ensure
optimum dryer performance. Be sure to
observe all listed warnings and
cautions.
These installation instructions are
intended for use by qualified installers.
In addition to these instructions the
dryer must be installed:
- In the U.S.A., in accordance with
the National Electric Code,
ANSI/NFPA70 -latest
edition/State and Municipal codes
and/or local codes.
- In Canada, in accordance with the
Canadian Electric Code C22.1 -
latest edition/Provincial and
Municipal codes and/or local
codes.
The gas installation must conform with
local codes, or in absence of local
codes, with the National Fuel Gas
Code, ANSI Z223.1/NFPA 54 or the
CAN/CSA B149.1, Installation Codes.
Note:
This gas dryer has been UL and C-UL
listed for safe operation up to a height
of 7,700 ft. without any modifications to
components for natural gas.
Information concerning
waste disposal
Disposal of the packaging
Keep children away from shipping
carton and packaging components.
Danger of suffocation from plastic
foil and folding cartons.
All packaging materials are
environmentally friendly and can be
reused. Please dispose of packaging in
an environmentally friendly manner.
Please ask your dealer or inquire at
your local authority about current
means of disposal.
Disposal of the appliance
If appliance is no longer usable, pull
out main plug, cut off power cord
and discard with main plug.
To prevent children from locking
themselves in the appliance, remove
the door.
Old appliances are not worthless
rubbish! Valuable raw materials can be
reclaimed from environmentally friendly
recycling.
Please ask your dealer or inquire at
your local authority about current
means of disposal.
Before installing the dryer
Unpacking the appliance
The dryer is very heavy. Do not lift it
by yourself. Do not lift the appliance
by projecting components (e.g.
door) due to risk of breakage.
Remove the appliance packaging
carefully to prevent damage to the
surfaces.
Check the dryer for transportation
damage. Do not connect a dryer which
is visibly damaged. If in doubt, contact
your dealer.
Supplied components
After removing the packaging,
immediately remove any objects
from the drum.
The dryer is delivered as a complete
unit. The operating instructions and
supplied accessories can be found in
the drum.