AEG HRB64470XB Manual De Instrucciones página 40

3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Before the installation
Before you install the hob, write down the
information below from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................
3.2 Built-in hobs
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
3.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable, use
the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Contact an Authorised Service
Centre. The connection cable may only be
replaced by a qualified electrician.
3.4 Assembly
If you install the hob under a hood, please
see the installation instructions of the hood
for the minimum distance between the
appliances.
min.
500mm
40 ENGLISH
Find the video tutorial "How to install your
AEG Radiant Hob - Worktop installation" by
typing out the full name indicated in the
graphic below.
min.
50mm
min.
12
www.youtube.com/electrolux
www.youtube.com/aeg
How to install your AEG
Radiant Hob - Worktop installation
min.
28
min.
12 mm
min.
60 mm