Publicidad
Idiomas disponibles
Idiomas disponibles
24
HOW
TO USE
OPTIONS
After
selecting
a cycle,
press
the Options
button
to
select
additional
features
for your
load.
NOTE:
• To protect
your
garments,
not
every
feature
is
available
with
every
cycle.
• If the START/PAUSE
button
is not pressed
within
60 minutes
to start the cycle,
the control
will shut
off and all settings
will be lost.
SOAK
This option
provides
30-minutes
presoak
prior to the
start
of the selected
cycle.
Use the SOAK
option
to
presoak
garments
to help remove
difficult
spots
or
stains
on fabrics.
At the end of the presoak
time, the
selected
cycle will begin
with
the same
water
used
for the soak.
NOTE:
You cannot
select
the
SOAK
option
in the
TUB
CLEAN,
WATERPROOF,
and ALLERGIENE
TM
cycles
or with
the STEAM
option
selected.
STAIN
CARE
Use this
option
for
heavily
soiled
loads
that
need
improved
stain
treatment.
When
Stain
Care is se-
lected,
the wash
cycle
will begin
with
warm
water
to help prevent
the setting
of certain
types
of stains.
Then, as the cycle progresses,
hot water
will be add-
ed to gradually
increase
the water
temperature
to
help remove
stains
that require
treatment
at higher
temperatures.
NOTE:
• Best results
are obtained
with
smaller
loads (less
than 6 Ibs.)
• If you
select
STAIN
CARE,
the COLDWASH
op-
tion is not available.
SPIN
ONLY
Use this option
to drain the water
from
the tub and
spin out the clothes.
This can be used,
for example,
if the wash
cycle
is interrupted
by a power
failure.
The spin speed
can be adjusted
by using
the SPIN
SPEED
button.
1. Press the POWER
button
to turn on the washer.
2. Press
the
Options
button
repeatedly
until
Spin
Only is selected.
3. Press
the Spin button
to select
the desired
spin
speed.
Selecting
NO SPIN and EXTRA
HIGH are
not allowed.
4. Press the START/PAUSE
button.
RINSE
+ SPIN
Select
this option
to rinse and spin a load separately
from a regular
cycle.
This can be helpful
in prevent-
ing fresh
stains
from
setting
in fabrics.
You
can
change
the spin speed
by pressing
the SPIN SPEED
button.
1. Press the POWER
button
to turn on the washer.
2. Press the Options
button
until the Rinse+Spin
indi-
cator light is lit. (The cycle light will turn off.)
3. Press the START/PAUSE
button
to start the cycle.
SPECIAL
DRAIN
FEATURE
This washer
is equipped with a special feature that
is designed to make
your washer
as safe as pos-
sible. Ifthe washer is paused or shut offwhile there
is still water
in the tub, the water
will drain automati-
cally after
several
minutes
of inactivity.
This
helps
keep children
safe by reducing
the possibility
of wa-
ter remaining
in the tub.
Any water
remaining
in the
tub will
automatically
drain 4 minutes
after the washer
has shut off. If the
washer
is paused
and the START/PAUSE
button
is
not pressed
within
60 minutes,
the washer
will shut
off and all cycle
settings
will be lost. And any water
remaining
in the tub will be drained.
The washer
can be turned
on or restarted
any time
before
the drain begins.
However,
once the washer
begins
to drain, all controls
and functions
will be dis-
abled
until the water
has been
completely
drained
and the washer
shuts
off.
Publicidad
