Publicidad
Idiomas disponibles
Idiomas disponibles
26
HOW
TO USE
FABRIC
SOFTENER
The fabric softener
is dispensed
in the final rinse. Se-
lect the Fabric Softener
button
if you are using fabric
softener.
EXTRA
RINSE
This option will add an extra rinse to the selected
cycle.
Use this option to help ensure the removal of detergent
or bleach residue from fabrics.
Liquid fabric softener,
if
used, is always dispensed
in the final rinse.
NOTE: You cannot select
the Extra Rinse option
with
the Spin Only option and Tub Clean cycle.
WATER
PLUS
Use this option if you wish to add more water to your wash
load. This option
is especially
useful for large or bulky
loads.
NOTE:
• If the washing
machine
reaches
its maximum
water
level, the Water Plus button
will have no effect.
• You cannot select
the Water Plus option
in the
Tub
Clean and Bedding cycles.
SIGNAL
The washing
machine
plays a melody
when
the wash
cycle has finished.
The volume
of the melody
is adjust-
ed using the Extra Rinse button.
Press and hold the Extra Rinse button
for 3 seconds
to adjust the volume
of the signal. Press and hold
the
button
repeatedly
to adjust the volume
of the melody.
When
no signal is heard, the signal is off. The volume
settings
are LOW - HiGH
- OFF. The signal
volume
can be adjusted
at any time as long as the washer
is
turned ON.
CHILD
LOCK
Use this option to disable the controls.
This feature
can
prevent children
from changing
cycles
or operating
the
machine.
Once the Child Lock is set, it must be deac-
tivated
before any controls,
except
the power
button,
can be used. Once the washer
has shut off, the power
button
will allow
the machine
to be turned
ON,
but
the controls
will still be locked. When
the controls
are
locked,
CL will display
alternately
with
the estimated
time remaining.
Press and hold the Water
Plus button
for 3 seconds
to
activate
or deactivate
Child Lock.
NOTE: Once
the controls
are locked,
they
must
be
manually
unlocked
to restore
operation.
ADD GARMENT
Laundry
may ONLY be added to the load at the prop-
er time
in the wash
cycle.
When
the Add Garment
light is illuminated,
it is safe to pause the cycle
and
add more
items
to the load. If garments
are added
when
the Add
Garment
light is off, the washer
will
not adjust
for these
items
which
could
result
in poor
performance
and/or fabric
damage.
1. Press
the
START/PAUSE
button
to pause
the
washer.
2. Open
the lid after it unlocks.
3. Add your additional
items.
4. Close the lid.
5. Press
the START/PAUSE
button.
The
cycle
will
resume
after the lid locks.
Publicidad
