Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TOUSZ
25
OPTION BUTTONS
Your washing
machine
features
several additional
cycle
options
that customize
cycles
to meet your individual
needs. To use these options,
select the desired
option
AFTER selecting
the desired
cycle.
After
selecting
the desired
cycle and settings,
press
the cycle option
button(s)
for the option(s)
you would
like to add. The button
will light when
that option
is
selected.
If the selected
option
is not allowed
for the
selected
cycle, the chime will sound twice
to alert you
and the LED will not illuminate.
NOTE:
o To protect
your garments,
not every option
is avail-
able with
every cycle.
o If the START/PAUSE
button
is not pressed within
60
minutes
to start
the cycle, the control
will shut off
and all settings
will be lost.
STEAM
Adding
the Steam option to a wash cycle helps provide
superior
cleaning
performance.
By using hot steam,
the fabrics
will get the cleaning
benefits
of a very hot
wash.
,,zLWARNiNG
..............
• Do not touch the lid during
steam cycles, The lid J
surface
can become
very hot. Allow the lid lock
to release before opening the door.
• Do not attempt
to override
the lid lock mecha-
i
nism
or reach
into the washer
during
a steam
cycle. Steam can cause severe burns.
NOTE:
o The steam option
cannot be used with all cycles.
o The STEAM
option is automatically
deselected
if
Turbo Wash
TM
is selected
for the NORMAL,
HEAVY
DUTY, SANITARY,
and BRIGHT WHtTE
TM
cycles.
o Steam may not be clearly visible during the steam
cycles. This is normal. Too much steam could dam-
age clothing.
o Do not use steam with
delicate fabrics
such as
wool, silk, or easily discolored
fabrics.
COLD
WASH
This option saves energy
by using cold water
while
in-
creasing
the wash and rinse times
to maintain
wash
performance.
NOTE:
o The Stain Care feature
cannot
be selected
with
the
Cold Wash option.
o Wash
time will
increase
up to 50%
with
the Cold
Wash option.
o For best wash
results,
only wash
small loads (less
than 8 Ibs.) with
the Cold Wash option.
DELAY
WASH
Once you have selected
the cycle and other
settings,
press this button
to delay the start
of the wash cycle.
Each press of the button
increases
the delay time by 1
hour, for up to 19 hours. Once the desired delay time is
set, press the START/PAUSE
button
to start the delay
time.
NOTE: If the START/PAUSE button is not pressed to
begin the delay time, the washer will automatically
shut off after 60 minutes and all cycle settings will be
lost.
CUSTOM
PROGRAM
(PGM)
Custom
Program
allows
you to store
a customized
wash cycle for future
use. It allows
you to save your
favorite
temperature,
spin speed,
soil level, and other
options for a cycle, and then recall them at the touch of
a button. To create a Custom
Program:
1. Press the POWER button
to turn on the washer.
2. Turn the cycle
selector
knob to select
the desired
cycle.
3. Press the cycle
modifier
button
to change
the de-
sired setting.
4. Press the cycle option button
to add the desired
op-
tions.
5. Press and hold the Custom
PGM button
for 3 sec-
onds.
TO RUN A CUSTOM
PROGRAM:
1. Press the POWER button
to turn on the washer.
2. Briefly
press
the Custom
PGM
button.
The stored
settings
will display.
3. Press the START/PAUSE
button
to start
the cycle.
(Pressing any other button at this time will cancel the
Custom
Program.)
NOTE:
You may only save one custom
program
at a
time.
Pressing
and holding
the Custom
PGM
button
will overwrite
any previously
saved custom
program.
TURBO
WASH
TM
Adding
the Turbo
Wash
TM
option
reduces
the cycle
time while
still providing
similar wash performance
to
the same cycle without
Turbo Wash
TM.
NOTE:
• The Turbo Wash
TM
option
cannot
be used with
all
cycles.
• Turbo
Wash
TM
defaults
ON for NORMAL,
HEAVY
DUTY and SPEED WASH cycles.
• Turbo Wash
TM
is automatically
deselected
for NOR-
MAL, HEAVY DUTY, BRIGHT WHITES
TM
and SANI-
TARY cycles
if the STEAM
option
is selected.
Publicidad
