Imetec BELLISSIMA S2602 Instrucciones De Uso página 16

the forehead.
• While straightening, be careful not to near the plates too much to
the sensitive parts of the face, ears, neck or head.
• Leave the plates to cool down completely when finished, before
EN putting the appliance away.
ON / OFF
NOTE: Always keep the heating plates clean to ensure that
the straightener offers the best performance.
1. Connect the cable (4) to the power supply.
2. Switch the hair straightener on by pressing the ON/OFF button (9).
3. Select one of the 5 temperature values (150°C - 170°C - 185°C
- 210°C - 230°C) by pressing the + or - button (8).
NOTE: The straightener features an electronic temperature
regulation system. This means that the temperature of the
straightener can be adjusted to suit the hair type:
150°C: recommended for fine hair
170°C - 185°C: recommended for medium hair
210°C - 230°C: recommended for thick hair
In case of doubts, always begin with the lowest temperature,
increasing it gradually until you find the ideal temperature.
4. The appliance is ready for use when the temperature shown on the
LED display (6) stops flashing.
5. When you have finished styling your hair, switch the appliance
off by pressing and holding the ON/OFF button (9). Wait for
the appliance to cool down. Disconnect the plug and let the
appliance cool completely.
STRAIGHTENER CLOSURE SYSTEM
• The straightener has a closure system (5).
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.
USE
14