Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Reset Filter Indicator
Operation
1
• When it is time to clean or replace the filter, one of the following messages will appear
Cool
Set to
74
Cool
F
Time to clean filter
• Wash, clean, or replace the filter or element.
2
• Reset the filter indicator when the filter or element is cleaned or replaced.
• Press Menu/OK button.
3
• Press
Main Menu
1/2
Reset Filter Indicator
Air Flow Direction
Ventilation
Schedule
Off Timer
Celsius / Fahrenheit
Setting
Cool
Set to
• The display shown in illustration 1 will disappear from the basic screen
Cool
74
F
Maintaining the Unit and LCD Display
• Wipe the LCD and surface of the remote controller with a dry cloth when they become dirty.
• If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with water, squeeze the cloth tightly,
and clean the surface. Wipe the surface with a dry cloth.
Note
• Do not use any paint thinner, organic solvent, or strong acid.
6
on the bottom of the basic screen.
"Time to clean filter"
"Time to clean filter & element"
"Time to clean element"
For details, refer to the Operation Manual supplied with the indoor unit.
The main menu screen will appear.
buttons to select
screen and press Menu/OK button.
when the filter sign is reset.
Reset Filter Indicator
on the main menu
3P362438-8N
English
Publicidad
