Sinbo SVC 3464 Instrucciones De Uso página 11

• Push the handle port closed so that it snaps shut. (Fig. 3 & 4)
Fig. 3
Attaching the Crevice Tool and the Floor Brush to the Main Body
• Push the crevice tool or floor brush into the suction hole opening. (Fig. 5)
• The following are recommendations for accessory usage:
Crevice Tool
For radiators, crevices, corners, base-boards and between cushions.
Floor Brush
For all kinds of flooring, including carpeted and tiled floors.
Winding & Unwinding the Power Cord
This vacuum cleaner is equipped with a convenient cord storage feature. This unit also has a quick
release cord hook
• Wind power cord around the quick release cord hook and the cord winding hook. (Fig. 6) To unwind
the power cord, simply twist the quick release cord hook to the left or right.
Fig. 6
Quick Release Cord Hook
Cord Winding Hook
Power switch
• The On/Off power switch has two different positions. (Fig. 7)
• Push on the "I" side to turn the vacuum ON.
• Push on the "O" side to turn the vacuum OFF.
OPERATING INSTRUCTIONS
Push handle port so
that it snaps shut.
Fig. 5
- 10 -
Fig. 4
Caution: The suction hole opening must be
open and free of any obstructions at all times.
Otherwise, the motor will overheat and could
become damaged.
Fig. 7
On Position
Off Position