Maytag Precision Touch 750 Serie Guía De Uso Y Cuidado página 10

5
To cancel the Clock display:
If you do not want the dme of day to dbpHay: /_ A _ nt-_
Press and hoid the Upper Oven CANCEL
and CHockpads for severai seconds. The
time of day wiii disappear from the dispiay.
When the chock dispiay is cancelled, press
the CHockpad to brbfiy dispiay the time of day.
To restore the Clock display:
Press and hoid the Upper Oven CANCEL and CHockpads for
severai seconds. The time of day wiii reappear in the dispiay.
The timer can be set from one minute (1:00} up to 11 hours
and 59 minutes (11:59}.
The timer can be used independentiy of any other oven
activity'. It can aiso be set whiie another oven function is
operating.
The timer does not controi the oven.
To set the Timer:
1. Press the Timer pad.
.....
° "0:00" iights in the dispiay.
° "Timer" wiii flash.
2. Press the More+ or Less- pad untii the
correct time appears in the dispiay.
° "Timer" wiii continue to flash,
3. Press Timer pad again or wait four seconds,
° The time begins counting down,
° The Hastminute of the timer countdown wiii be dispiayed
as seconds.
4. At the end of the set time, three iong beeps wiii sound.
To cancel the Timer:
1. Press and hoid the Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 0:00.
Locking the Control
and Oven Doors
The touchpads and oven doors can be Hockedfor safety,
cleaning, or to prevent unwanted use. They will not function
when Hocked.
If the oven is currentiy in use, the touchpads and doors
cannot be Hocked.
The current time of day wiii remain in the dispiay when the
controis are Hocked.
To lock both doors:
Press and hoid the Upper Oven CANCEL and
Cook &Hoid pads for three seconds,
° "Lock" flashes in the dispiay whiie both
oven doors Hock.Once compiete, "Lock"
stops flashing.
° "OFF" is dispiayed for 10 seconds whenever a pad is touched.
To nnlock both doors:
Press and hold the Upper Oven CANCEL and Cook & Hold pads
for three seconds.
, "Lock" flashes and then disappears from the dispiay.
, "OFF" appears in the dispiay for severai seconds whiie
doors are uniocking.
Note: The touchpads and oven doors cannot be Hockedif the oven temperature is 400° F or above.
Fault Codes
"Bake" or "Lock" may flash rapidiy in the dispiay to aiert you if
there is an error or a probiem. If "Bake" or "Lock" flash in the
dispiay, press CANCEL pad. If "Bake" or "Lock" continue to
flash, disconnect power to the appiiance. Wait a few minutes,
and then reconnect power. If the flashing stiii continues,
disconnect power to the appiiance and caii an authorized
servicer.
Adjusting the Sound LeveJ
The factory default setting for sound is medium {MEd}, but it
can be changed to low (Lo} or high (HI}. To change the
setting:
1. Press and hold More+ and upper oven CANCEL pads for
three seconds. A beep will sound and the current sound
level C'Lo", "MEd" or "HI"} wiii appear in the display.
2. Press More+ pad to increase sound level or the Less- pad
to decrease sound level.
3. Wait four seconds and the new setting wiii be accepted.
4. If the More+ or Less- pad is not pressed within 30 sec-
onds, the control will return to the existing settings.
Changing Temp °F/°C
The factory defauit setting for temperature is Fahrenheit. To
1. Press and hoid the upper oven Bake and CANCEL pads for
three seconds. A beep wiii sound and the current setting
(°F or °C} wiii appear in the display.
2. Press the More+ or Less- pad to change the setting
between °F and °C.
3. Wait four seconds and the new setting wiii be accepted.
9