Char-Broil 468973023 Instrucciones De Funcionamiento página 8

be painted). Apply a strong solution of detergent and water
or use a appliance cleaner with scrub brush on insides of
appliance lid and
bottom. Rinse and allow to completely air dry. Do not apply
caustic appliance/oven cleaner to painted surfaces. • Plastic
parts: Wash with warm soapy water and wipe dry. Do not use
abrasive cleaners, degreasers or a
concentrated appliance cleaner on plastic parts. Damage
to and failure of parts can result.
• Porcelain surfaces: Because of glass-like composition,
most residue can be wiped away with baking
Firebox
Electrode
Carryover tub e
Pry off electrode with a
CLEAN Setting
Your grill is equipped with an
innovative CLEAN setting that allows for
hassle-free grill cleaning. The high heat
generated from the burners will turn all
+
remaining food debris to ash. Follow
these steps:
Firebox Burner Support
flate blade screwdriver
• After you are done grilling, adjust all
main burners to CLEAN setting and
remain for approximately 12 – 15
minutes
• After approximately 12 – 15 minutes,
adjust all main burners to OFF setting
PLEASE
+
CH Gas
soda/water solution, glass cleaner or Char-Broil Grate
Cleaner. Use nonabrasive scouring powder for stubborn
stains.
• Painted surfaces: Wash with mild detergent or cleaner and
warm soapy water or Char-Broil Grill Cleaner. Wipe dry with
a soft nonabrasive cloth.
• Cooking surfaces: Ensure no loose bristles remain on
cooking surfaces prior to grilling. While grill is hot, it is only
recommended to clean cooking surfaces using the Char
Broil Hot-Clean Replacement head (on the Char-Broil Cool
Clean Premium Brush).
and allow grill to cool
• Once the grill is cool, use a Char-Broil
Cool-Clean Brush to remove any
remaining debris and dispose of the ash
• To get extra-shiny results, use the
Char-Broil Grate Cleaner as a last step.
Spray generously onto the grate, allow it
work for 10 minutes and wipe off with a
wet cloth or brush.
IMPORTANT!
✓
READ!
Cylinder + CH Regulator
✓
5