cecotec BOLERO SQUAD V 2001 Manual De Instrucciones página 48

ENGLISH
5
6
7
8
9
10
11
12
4.1. Display. Fig. 10
1) Single digit display: shows the corresponding power level, the double cooking ring symbol,
and the high temperature warning symbol in the cooking zone ( ).
2) Two-digit display: shows the corresponding time settings and the safety child lock symbol.
3) Display of heating of several cooking rings: After activating the double cooking ring mode,
the corresponding display of the selected cooking zone shows the inner ring or double
ring symbol. The selection of inner ring or double ring is indicated by the display of each
cooking zone.
1. Switch on
When the power is turned on, the hob will beep once to indicate that the power is on. Then, all
indicators on the display will light up for 2 seconds. Next, the appliance will go into shutdown mode.
Please note
The corresponding decimal point indicator will light up on the display.
Switch off
The entire display will turn off except for the high temperature warning symbol. The power
icon can be used by pressing and holding it. However, the rest of the icons will not be available.
2. Standby mode
- When the hob is switched off, press and hold the power icon for 3 seconds. The hob will
beep and enter standby mode.
48
BOLERO SQUAD V 2001
Bottom cooking-zone selection icon
Bottom cooking zone display: it indicates the power level, the high-
temperature warning symbol, etc.
Timer icon: it is used to set the cooking time of each cooking zone.
Time display: it indicates time, child lock symbol, etc.
Increase icon: it is used to add time and increase power level.
Decrease icon: it is used to reduce time and power level.
Safety child lock icon: press and hold to lock or unlock the control panel.
Power icon: press and hold to switch on or off the ceramic hob.