Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up the device
Insert batteries into the remote control
1.
Open the battery compartment by pushing the cover in
the direction of the arrow.
2.
Insert 2 micro 1.5 V LR03 batteries, size
AAA into the remote control. The negative poles should
each be on the spring.
3.
Close the battery compartment.
Establishing sound output
You need to connect the record player to a sound output device with speakers and volume
control, e.g. your stereo system.
Connect a cinch cable with a red and white plug to the LINE OUT outputs on
1.
the back of the device.
2.
Connect the other end of the cable to appropriate inputs on the sound playback
device (e.g. LINE IN or AUX IN).
3.
Select the appropriate input for this device.
NOTE
Do not connect the device to the phono input because this input has pre-
amplification and the record player already has pre-amplification.
Sample connections:
Mains power
After making all the connections, connect the device to a 230 V ~ 50 Hz mains socket.
10
English
Publicidad
