GE 20 Serie Manual Del Propietario E Instalación página 15

Installation Instructions
DOOR ALIGNMENT
Mter leveling, make sure that doors are even at the top.
To make the doors even, adjust the refrigerator door.
O Using a 5/16' socket wrench, turn the door adjusting
screw to tim right to raise the door, to the left to lower
it. (A nylon plug, embedded in the threads of the pin,
prevents tim pin from turning unless a wrench is
O used.)
zM'ter one or two turns of the wrench, open and close
the fresh fbod door and check the alignment at tim
top of tim doors.
To removethebase
grille, ogenthedoo_s
andthen pullthe
grille straightout
5/16"Socket
/ Wrench
--_1_ Raise
15