Peg-Perego PRIMO VIAGGIO 360 EVO Instrucciones De Uso página 22

the small metal hook that links the harness shoulder
straps.
26 Release the hook of the shoulder straps and the buckle of
the safety harness.
27 Remove the shoulder strap padding (1), the Dual Stage
Cushion (2) and the car seat's crotch padding (it has
Velcro - 3).
28 Unfasten the buttons from the top part of the padded
seat (1), slip the strap through the opening and access
the central compartment on the bottom of the seat.
Place the harness in the compartment and close it.
29 When you have finished, the car seat will look like the one
in the picture.
How to secure your child
30 Secure your child with the car safety belt as shown in the
figure. Fasten the seat belt, ensuring that it clicks into
place. Position the two sections of the belt as shown in
the figure.
31 To finish, slide the belt through the belt router on the
head rest: insert the belt between the belt router and
head rest (1) until it slides easily in the strap slot (2).
IMPORTANT: if the belt is loose, tighten it through the
belt router (3). Make sure the belt is always taut and not
twisted.
32 IMPORTANT: the safety belts are correctly positioned if the
child's shoulders are slightly below the point the safety
belts pass through the seat, as shown in the figure.
Product identification
33 Inside the back compartment, you can find the approval
label and the label with the following information:
product name, production date and serial number.
This information is essential in the event of a claim.
The Original Accessory Peg Perego
Peg Perego accessories are designed as a useful, practical
means of simplifying the lives of parents. Discover all your
product's accessories on www.pegperego.com
Product cleaning
• This product requires minimal maintenance. Cleaning and
maintenance must only be carried out by adults.
• It is advisable to keep all the moving parts clean.
• Clean the plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device
with solvents or other similar products.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
Peg Perego S.p.A.
Peg Perego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO 9001
standard. Peg Perego can make changes at any time to
the models described in this publication for technical or
commercial reasons.
Peg Perego after-sales service
If any parts of the item get lost or damaged, only
use genuine Peg Perego spare parts. For any repairs,
replacements, information on the products and sales of
genuine spare parts and accessories, contact the Peg
Perego Assistance Service and state the serial number of
the product, if present.
tel. 0039/039/60.88.213
e-mail customer.service@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of Peg Perego S.p.A. and are
protected by the laws in force.
22
•
•
•
•
•
•
•
•