Xylem FLOJET Triplex Diaphragm Manual De Instrucciones página 2

FEATURES
•
Self–Priming
•
Dry Running
•
Soft Noise Absorbing Mounts
•
Snap–in Port Fittings
•
Reduces need for accumulator tank
•
Corrosion Resistant Materials
SPECIFICATIONS
Motor: Permanent Magnet, Ball Bearing Totally
Enclosed. Fully suppressed.
Pump: Three chamber diaphragm design Self-priming
up to 9 feet suction lift; Pump able to run dry without
damage.
PUMP DIMENSIONS - INCHES (MM)
SERIES HEIGHT
3X26XXX 4.75 (121)
EXPLOSION HAZARD: Do not use motor pump
units for pumping gasoline or other flammable
liquids. Doing so may result in explosion which
could cause personal injury, death or property
damage.
DIMENSIONAL DRAWING
DESSIN DIMENSIONNEL / DIMENSIONALE ZEICHNUNG / DISEGNO DIMENSIONALE / DIMENSIONALE TEKENING
DIMENSIONELL RITNING / DIBUJO DIMENSIONAL
WIDTH LENGTH
6.00 (152) 9.00 (229) 3.50 (1.59)
Self Declaration Of Conformance (SDOC) is available upon request.
OPERATION
With pump switch off and battery fully charged, fill water
tank, open all faucets, then turn pump switch on. Water will
begin to flow.
When the water is free of air, turn faucets off. Remember,
you are filling the water heater and the toilet and shower
WEIGHT
lines. When all valves are shut-off, pump will stop. Should
pump fail to stop, turn switch off and see the trouble shoot-
LB. (KG)
ing guide.
CAUTION — Pump surface will get hot to the touch if
operated for extended periods of time under pressurized
conditions.
2
MODEL R3426-500
VOLTS
12V DC
AMP DRAW @ 2.0
10 PSI (0.7 BAR)
1.4 (5.3)
FLOW
GPM (LPM)
20 (1.4)
PRESSURE SWITCH
MAX PSI (BAR)