Maytag MD-1 Guía De Uso Y Cuidado página 9

FabricSelection
Dryness S ettings sensor Dry
Jeans
Less Normal
_ Wdnk[e Control
_More
De[icates c
Regular
Refresh
6o
Time Dry
50 Air Fluff
40
L_
ii 20
Power
Off
On
_eCapadty Ouiet Sedes 200 / 12 Cvdes
Dryinq Pause
"__LyQe
Status
Push to Stale - Push to Stoo
Off
Wrinkle
Prevent
.... /
Cycles and options may vary by model.
Refresh (select models)
Delicates
The Refresh cycle is designed to release wrinkles from
items that are clean and dry but only slightly wrinkled,
such as from a crowded closet or suitcase or from
sitting in the dryer too long after the cycle has ended.
Refresh can be used with any temperature selection.
Note: If the dryer detects moisture in the load when
Refresh is selected, the dryer will automatically switch
to the Wrinkle Control cycle which may extend the
cyc e time.
Regular
The Regular cycle is designed to dry loads such as
towels and underwear.
The Delicates cycle is designed to dry heat-sensitive
items at the low drying temperature.
Time Dry/Air Fluff
The Time Dry cycle can be used to regulate the drying
time. Use with any temperature setting. For timed
drying, turn the cycle selector dial to the number of
minutes desired. An indicator light will illuminate by
the setting.
I
Note: Using the Air Fluff temperature setting will I
require a longer drying time.
I
Jeans (select models)
The Jeans cycle is designed to reduce wrinkling and
tangling in loads of jeans.
Wrinkle Control
The Wrinkle Control cycle is designed to dry wrinkle-
free cottons, synthetic fabrics, knits and permanent
press fabrics automatically.
Select models will automatically advance into Wrinkle
Prevent which provides an extra 30 minutes of
unheated tumble action at the end of the cycle.
Start the Dryer
After setting the cycle and desired options, press the
cycle selector dial to start the dryer. To pause the
cycle, press cycle selector dial again or by opening
the door. To restart the cycle, press cycle selector dial
and cycle will resume from the point of interruption.
Power Off
Turn the cycle selector dial to Power Off to cancel
the cycle and stop the dryer.
On dryer models with optional Wrinkle Prevent, the
additional 95 minutes of unheated tumbling can be
canceled by turning the switch to Off or by opening
the door.