Publicidad
Idiomas disponibles
Idiomas disponibles
5. USING THE JUICER
BEFORE YOU BEGIN:
• Make sure the POWER SWITCH is in the OFF position before you begin.
• Make sure the JUICE CONTAINER and PULP CONTAINER are in the correct position.
• Make sure the JUICE CAP is open before you begin juicing.
• Plug in your juicer.
PREPARATION:
Prepare your fruits and/or vegetables for your juicing session. It is recommended to cut stringy
vegetables like celery into small strips or cubes. Cutting your produce will allow you to fit more
into the HOPPER for hands-free juicing. See examples below:
CELERY
Cut into strips
STEP 1:
Open the QUICK FILL TOP to and begin by
filling up the HOPPER with fresh produce for
simple batch juicing. Then close the QUICK
FILL TOP.
10
APPLES
Whole, Halved or
Quartered
CARROTS
Chopped into
½ inch pieces
STEP 2:
Turn on the machine by turning the POWER
SWITCH to the ON position.
NOTE: The machine will not operate unless
all parts are properly assembled. The QUICK
FILL TOP must be completely closed to turn
on. Refer to the assembly instructions on
page 8.
LEAFY GREENS
Whole or Chopped
Publicidad
