Publicidad
Idiomas disponibles
Idiomas disponibles
4. HOW TO ASSEMBLE
BEFORE YOU BEGIN:
• Make sure the machine is not plugged in prior to assembling the machine.
• Make sure the POWER SWITCH is in the OFF position prior to assembling the machine.
• Before using the juicer for the first time, clean all parts, except for the MAIN BODY, with
warm water and soap. Then rinse and dry thoroughly.
WARNING: Never immerse the MAIN BODY in water.
STEP 1:
Place the AUGER HOUSING on top of the
MAIN BODY, making sure both the juice and
pulp outlets are fully seated. Push the AUGER
firmly into the center of the AUGER HOUSING,
making sure the AUGER is fully seated on the
bottom.
8
STEP 2:
Place the SCREEN over the AUGER into the
AUGER HOUSING. Then align the SCREEN
over the top with the arrow pointing over
the pulp outlet and lightly twist to a seated
position.
Publicidad
