Shine KITCHEN SMB-1WH Manual De Funcionamiento página 13

7. CLEANING
1. Wash immediately after each use to avoid pulp residue.
2. Wash and rinse the parts shown below with warm water and soap. These parts may be
soaked for easier cleaning. Use the cleaning BRUSHES to thoroughly clean all juicing parts.
3. Use a damp cloth or sponge to clean and wipe down the MAIN BODY after use, if necessary.
Never submerge or use running water over the MAIN BODY.
4. Dry all parts with a cloth to prevent water spots before putting them away for storage.
PUSHER PRODUCE HOPPER
TIP: Use the BRUSH WITH PULP PICK to quickly clean the pulp out from the underside of the AUGER.
AUGER HOUSING
CLEANING THE PRESSURE PLUG
To clean the pulp outlet of the
AUGER HOUSING, simply pull out the
PRESSURE PLUG from the bottom and
clean under running water. Then dry
and push the plug back once it is dry.
Note: Do not remove the screw that
holds the PRESSURE PLUG in place.
SCREEN AUGER
EN
13