Publicidad
Idiomas disponibles
Idiomas disponibles
3. TIPS AND TRICKS
We are so happy to welcome you to the #tribestlife!
Please take a moment to read through this quick start guide before you move on to the
assembly instructions so you can best enjoy the use of your new tool for healthy living!
For the best juicing experience:
• While juicing, feed in produce then watch for the pulp to eject out of the pulp outlet.
You may feed the juicer continuously, but do not force the machine to work faster
by overfeeding it. If you overfeed the machine and cause a jam, use the REVERSE
Function (REV) to dislodge it.
• For easier cleaning at the end of your juicing cycle, run water through the
HOPPER with the machine on. This will push out most of the remaining pulp and
shorten your cleaning time.
• Your machine is equipped with overheat protection. This machine has a compact
motor that is designed to run for no more than 20 minutes continuously. If your
motor starts to heat up, it will automatically shut off until it cools back down in order
to prevent damage to the motor by overheating. Wait until the machine cools down
before resuming any juicing activity.
• We offer replacement parts and additional juicing accessories at
www.shinekitchen.co. If you need support or special shipping options, please
contact our customer service center at service@tribest.com or 1-888-254-7336.
Your juicer will not turn on unless all parts are
properly assembled. To do this, please be sure to
follow the assembly instructions on the following pages
to ensure the safety switch is completely engaged.
Make sure the AUGER
and SCREEN are fully
seated before twisting the
PRODUCE HOPPER into
the locked position.
EN
7
Publicidad
