< Onscreen Display>
< Function and Operation>
LA TRAPEZOIDAL
adjustment
The image can be corrected for trapezoidal
distortion.
C\
TRAPEZOID
50
ШШШ
Press the [9 key to make the top edge narrower,
Eri et SERE
the Kl key to make the bottom edge narrower.
The image can be corrected for parallelogram
distortion.
Press the [4 key to collapse the parallelogram to
the left, the ВЈ key to collapse it to the right.
[7 PARALLELOGRAM
adjustment
[7 PARALLELOGRAM
50 NEN —
Hp.
1
A
f
Use this to adjust for tilt on the screen.
LH ROTATION (Image tilt) adjustment | press the q key to rotate the image slightly
counterclockwise, the PB) key to rotate the image
CH
ROTATION
slightly clockwise.
"Pressing the Ed and Kl keys simultaneously adjusts
50 ME
|
ka
Aa
CEU
rotation to its factory preset level ( 50 ).
The white їп the image can be adjusted.
1) Use the [4- P] keys to select 1: 9300K, 2:
6550K or 3 : the user's preferred color.
COLOR
TEMP
2) If "3 : user's color" is selected, * 2" appears in
1
2
kä
the lower right of the On-Screen Display.
CTI
USER:B
|
Press the front [2] key to call the USER
COLOR adjustment screen.
COLOR selection
USER COLOR adjustment
The white in the video image can be adjusted to
the user's preferred color.
1) Use the [2] key to select R (red) ог С (green) or
B (blue).
2) Use the [4- P) keys to adjust the color as
desired.
Note : Recall of the user's color is not possible,
so make a note of the initlal setting
before adjusting.
* Press the [1] key to save the adjustment.
NOTE:Record the initial values of R,G&B
here before making any adjustments:
R(Red)
— ————
С (Green )
B
(Blue )
The computer's horizontal and vertical sync
frequency will appear.
* Press the [1] key to return to main menu.
DISPLAY FREQUENCY
DISP.FREQ
fH : 56.
1КН2
fV : 70.0
Hz
CR
The video input signal level can be matched to
the computer being used. Either 0.7V or 1V can
be selected with the [2] (0.7V/1V) key.
Note : 0.7V is typical.
(If wrong level is selected image may be to dim
or to bright.)
NO VIDEO INPUT LEVEL
No
VIDEOLEVEL
0.7V
| Ш
0.7/1V:[] |
mid