Hohem iSteady MT2 Manual De Instrucciones página 10

2.Mounting the Quick Release Plate
a. Mount the camera onto the camera quick release plate, and tighten the screw.
It is required to tighten the screw in case of stabilizer shaking
when the stabilizer is powered on.
c. Attach the camera with the quick release plate onto the L-Bracket.
b. Loosen the L-Bracket with the
thumb screw wrench (magnetically
attached to the L-Bracket). Adjust
the L-Bracket according to the
width of the camera and tighten the
screw after fitting properly.
EN 05