Hohem iSteady MT2 Manual De Instrucciones página 25

9.Motor angle fine-tune:
10. Pairing/unpairing with
GoPro camera:
09 How to Use the Hohem Joy App
Bluetooth Connection
1. Power on iSteady MT2.
2. Turn on Bluetooth on Mobile Phone.
3. Launch the App Hohem Joy and follow the prompts to connect iSteady MT2 device.
*If the stabilizer's Bluetooth cannot be found or if it is being occupied by another
phone, you can try clearing the stabilizer's Bluetooth information to reconnect it.
Long-pressing the M button for five seconds while simultaneously pushing up on the
Zoom lever. The Bluetooth symbol
has been cleared.
The current fine-tune value of angle for each motor
Signal strength icon flashing represents the stabilizer
is pairing with GoPro, signal strength icon stop flashing
and a " ✓ " showing represents successful pairing.
(Note: If no camera is paired with stabilizer within 60
seconds, signal strength icon stops flashing and
icon shows, which represents failed pairing;
represents successful unpairing.
on the display implies that the paired device
Long-pressing
the M button
Pushing up on
the Zoom lever
*Press and hold both of
buttons for 5 seconds.
EN 20
Clear the paired camera," ✓ "