Prebena PKT-8-RHC40 Manual Del Usuario página 109

Description
Task and function
Task
Fastener driving tool PKT-8-RHC40 drives in round head nails
15-40 mm long with a shaft diameter of 2.6–3.0 mm.
Type RHC-L and RHC-S.
The nails may only be driven into concrete materials and structural
steel (S-235). The maximum strength for concrete materials should
not exceed C50/60 in accordance with DIN 1045-2.
Functional principle
The nails are driven into the material by compressed air. The energy
sources are the pressure accumulator, which can be filled with
cartridge KT-1000, and the rechargeable battery.
The tool has a triggering process for nail driving:
Single triggering with safety follow-up
A triggering process that allows one single driving process generated
by the triggering mechanism after the triggering safety device has
been activated. Additional driving processes can only be triggered
if the triggering mechanism and triggering safety device have
returned to the original position.
27