Prebena PKT-8-RHC40 Manual Del Usuario página 126

Before operation
▶ To remove the battery, press the red button (2):
 Then the battery can be pulled out towards the front.
Turning on the tool
The tool can only be turned on if the triggering mechanism
and safety bar are not activated (in the original position).
▶ Turn on the tool by pressing the ON/OFF button (1)
on the control panel for at least 2 seconds:
2
1
 The green LED (2) is lit continuously.
The tool turns itself off automatically after 10 minutes
if it has not been activated in any way.
44