Makita DTW1001 Manual De Instrucciones página 4

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening Standard bolt
capacities
High tensile
bolt
Square drive
Drive shank
No load speed Hard impact
(RPM) mode
Medium
impact mode
Soft impact
mode
Impacts per Hard impact
minute mode
Medium
impact mode
Soft impact
mode
Overall length
Rated voltage
For use near high-voltage
electrical power lines
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for fastening bolts and nuts.
Model DTW800 / DTW800XV: The tool is also intended
for drilling into wood.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-2:
Model DTW1001 / DTW1001XV
Sound pressure level (L
Sound power level (L ) : 109 dB (A)
WA
Uncertainty (K) : 3 dB (A)
DTW1001 DTW1001XV
19 mm
0 - 1,800 min
0 - 2,200 min
-
3.4 - 3.7 kg
) : 101 dB (A)
pA
DTW1002 DTW1002XV
M12 - M30
M10 - M24
12.7 mm
–
-1
0 - 1,000 min
0 - 900 min
-1
0 - 2,000 min
0 - 1,800 min
229 mm
D.C. 18 V
-
3.3 - 3.6 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Model DTW1002 / DTW1002XV
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model DTW1004 / DTW1004XV
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model DTW800 / DTW800XV
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
4 ENGLISH
DTW1004 DTW1004XV DTW800
-1
0 - 2,000 min
-1
-1
-1
0 - 2,400 min
-1
-1
223 mm
-
3.1 - 3.4 kg
DC18SH / DC18WC
) : 100 dB(A)
pA
) : 108 dB (A)
WA
) : 98 dB(A)
pA
) : 106 dB (A)
WA
) : 98 dB(A)
pA
) : 106 dB (A)
WA
DTW800XV
M12 - M24
M10 - M22
–
11.1 mm Hex.
-1
0 - 1,800 min
-1
0 - 2,200 min
229 mm
-
3.5 - 3.8 kg