Publicidad
Idiomas disponibles
Idiomas disponibles
RADIO RECEPTION
PRESETTING STATIONS
MANUAL PRESETTING
TUNING UP,DOWN
The unit can store a total of 32 preset stations. Presetting allows
you to tune in to a station directly. Stations are assigned preset
numbers, beginning from 1 in consecutive order for each band
(FM, MW, LW).
Automatic presetting:
This unit has a function for reception of **RDS (Radio Data
System) and other stations.
FM RDS stations take priority over other FM stations if there are
more than 32 receivable stations.
You can select stations to be preset from all the bands.
button repeatedly to select a band.
FM —— Mw —> LW
AUTOMATIC PRESETTING
i
al
The tuner scans through the receivable frequency range and
2 Press the /"\ or
/
button to select S station
stores stations automatically.
(Manual tuning).
Each time the button is pressed, the frequency changes.
@) When tuning in to an FM RDS station
After "TUNE" on the display goes out, the Program Service
station name (* PS) is displayed and the RDS indicator
lights up.
RDS
-
SUB WOOFER @} )
(Q center
——8
(ose
IHIIvouume
T-BASS
GS
Y
WY
(® When tuning in to the other stations
After "TUNE" on the display goes out, the band is
1 Turn the FUNCTION selector to select the TUNER
function.
displayed.
2 Keep the RT button pressed for three seconds
ge
sue wooreR @))
(0 centen
Zeit
until "AUTO PRESET" is displayed.
aaa
S o b
ae
; teas
3 Press the ENTER button while "AUTO PRESET"
=
eee
—sé
is displayed.
The tuner searches for a station, beginning with the FM band.
* During FM stereo reception, (t@1)) lights. .
When tuning in to a station, the tuner displays the frequency
of the tuned station for two seconds and stores it.
3 Press the ENTER button to store the station.
Stations with weak signals may not be stored.
The selected preset number appears.
°
is
sua WOOFER © )
(Q cENTER :
Say
ae
apace
(Q center
ae
ite
;
iiss
>
| J tense
:
pas
Ss
Se
es
4 Repeat steps 1 to 3 to store the stations.
The next station will not be stored if a total of 32 preset stations
for all bands have already been stored.
The search continues on the MW and LW bands if preset
numbers are still available.
When automatic presetting has been completed, the display
returns to the first preset station.
:
;
When operating with the remote control
Press the TUNER/BAND button while pressing the SHIFT button
'in step 1, and the TUNING DOWN or UP button while pressing
the SHIFT button in step 2.
When the tuner detects *? identical RDS stations with
alternative frequencies
Only the station with the stronger signal is stored.
Before storing an RDS station, the tuner checks first whether
the same stations on the other frequencies are present, and
stores the station with the best reception.
[NOTE
When automatic presetting is done, all previously stored stations
are cleared.
13 ENGLISH
Publicidad
