Publicidad
Idiomas disponibles
Idiomas disponibles
DISC CHANGE
\
EDIT/CHECK
< RANDOM/
e
REPEAT
\
caoo
.. -0-9,+10
OOQ
00
00
3:
z
SHIFT
~
Press CD, then press A OPEN/CLOSE
to open the
disc compartment.
Load disc(s) with the label side
up.
To ~lav one or two discs, placethe discson tray 1 and 2.
To ~lav
three discs, press DISC CHANGE to rotate
the trays
after placing
two discs.
Place the third disc on tray 3.
Close the disc compartment
by pressing
A OPEN/CLOSE.
a
~@$~
DISC CHANGE
A
, , !,..-
Tray 1
El
w>
<
--
Tray number
of the
disc to be played
Total playing
time
Total number
of tracks
Load discs.
To dav all discs in the disc compartment,
press 4>.
Play begins with
the disc on tray 1.
Number
of track being played
Elapsed
playing
time
To
play one disc
only, press DISC DIRECT PLAY 1-3.
The selected
disc is played once.
To
stop play,
press
.
To
pause play, press Il. To resume play, press again.
To search for a particular point during playback,
keep -
or -
pressed
and release
it at the desired
point.
To skip to the beginning of a track during playback, press
<
or -
repeatedly or turn MULTI JOG.
To remove discs,
press A OPEN/CLOSE.
To
start play when
the power is
off (Direct Play Function)
Press CD, The power is turned on and play of the loaded disc(s)
begins.
When
4 OPEN/CLOSE
is pressed,
the power is also turned
on
and the disc compartment
is opened.
TO
check the remaining time
During
play, press
EDIT/CHECK
on the remote
control
while
pressing
SHIFT.
The amount
of time remaining
until all tracks
finish
playing
is displayed.
To restore
the playing
time display,
repeat the above.
*CD
EDIT/CHECK
on the unit
is also
available
instead
of EDIT
CHECK
on the remote
control.
Selecting a track with the remote control
1
2
Press DISC DIRECT
PLAY 1-3 to select a disc.
Press numbered
buttons
O-9 and
+1 O
to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and O.
The selected
track starts to play and continues
to the end of
that disc.
Replacing
discs during play
While one disc is playing, the other discs can be replaced
without
interrupting
play.
1
Press DISC CHANGE.
2
Remove
the discs and replace
with other discs.
3
Press A OPEN/CLOSE
to close the disc compartment.
When loading
an 8-cm (3-inch)
disc, put it onto the inner circle
of the tray.
Do not place more than one compact
disc on one disc tray.
Do not tilt the unit with discs
loaded.
Doing
so may cause
malfunctions.
9
ENGLISH
Publicidad
