Publicidad
Idiomas disponibles
Idiomas disponibles
OTHER
CONNECTIONS
OUT
Refer to the operating
instructions
of the connected
equipment
for details.
c The connecting
cords are not supplied.
Obtain
the necessary
connecting
cords.
s Consult
your local Aiwa dealer for optional
equipment.
VIDEO/AIJX JACKS, MD JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
(turntables,
LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the
R
jack, and the white plug to the L jack.
When connecting
a turntable
Use an Aiwa turntable
equipped
with a built-in equalizer
amplifier.
This unit can output
analog
sound signal through
these jacks.
Use a cable with RCA phono plugs to connect
audio equipment
with LINE
IN
(analog
input) jacks.
Em
Do not connect
an equipment
to the LINE OUT terminals
and
VIDEO/AUX
terminals
simultaneously.
Otherwise,
noise
is
generated
and malfunction
occurs.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output
CD digital
sound signals
through
this jack.
Use an optical
cable to connect
digital
audio
equipment
(DAT
deck, MD recorder,
etc.).
Remove
the dust cap @ from the CD DIGITAL
OUT (OPTICAL)
jack. Then,
connect
an optical
cable
plug to the CD DIGITAL
OUT (OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being used
Attach
the supplied
dust cap.
SUPER WOOFERS
~ JACKS
,—--—_—
To play equipment
connected
to the VIDEO/AUX
or MD jacks
proceed
as follows,
1
2
Press VIDEO/AUX
or MD.
When a equipment connected to the VIDEO/AUX jacks is
played:
press
VIDEO/AUX.
When a equipment connected to the MD jacks is played:
press
MD,
Play the connected
equipment.
To change a source name in the display
When
VIDEO/AUX is
pressed,
'(VIDEO" is displayed
initially.
It
can be changed
to "AUX
or "TV".
With the power on, press
POWER
while pressing
VIDEO/ALfX.
Repeat the procedure
to select one of the names.
To adjust
the sound
level
of the external
source
When the sound level of the external
source
is much higher or
much lower than that of other function sources, adjust it as follows.
1
Press
VIDEO/AUX
or
MD
and play the equipment.
2
Press 4+
or ›~
so that the sound level becomes
the same
as that of other function
sources.
B%%H
During
recording,
the sound level can not be adjusted.
Connect
optional
powered
sub woofers
with built-in-amplifiers
to the jacks.
ENGLISH
20
Publicidad
