Publicidad
Idiomas disponibles
Idiomas disponibles
vowl,~
T-BASS
SHIFT
VOLUME
Turn VOLUME on the main unit, or press VOLUME on the
remote control.
The volume level is displayed as a number from O to
MAX (50).
The volume
level is automatically
set to 20 when the power
is
turned
off with the volume
level set to 21 or more.
BBE SYSTEM
The BBE system enhances
the clarity of high-frequency
sound.
It also enriches
the Karaoke
function
to make your voice sound
clear and pleasant.
Press
BBE.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position
to suit your preference.
BBE
To dim the illumination
of the display
1 Press DISP
twice so that "DIMMER"
is displayed,
2
Within 4 seconds,
turn
MULTI JOG to select the dimmer
mode
as follows,
r
DIMMER
O+
DIMMER
1 +
DIMMER
2+
DIMMER
3
7
I
I
DIMMER O:The normal display
DIMMER 1: The illumination of the display is dimmer than
usual.
DIMMER 2:
The illumination
of the display
is dimmer
than
DIMMER
1,
DIMMER 3:
The illumination
of the display
is dimmer
than
DIMMER
2, and the spectrum
analyzer
and the illumination
on the buttons
light off.
The T-BASS
system
enhances
the realism
of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
T-BASS
m
Low frequency
sound
may be distorted
when
the T-BASS
system
is used for a disc or tape in which low frequency
sound
is originally
emphasized.
In this
case,
cancel
the T-BASS
system.
When
playing
back
a tape
recorded
with
BBE,
it IIS
recommended
that BBE be set to off to avoid distorted
high
frequency
sound.
Using the headphones
Connect
headphones
to the PHONES
jack with a standard
stereo
plug (@6.3 mm, '/, inch).
No sound is output from the speakers
while the headphones
are
plugged
in.
Sound adjustment
during recording
The output
volume
and tone (except
BBE) of the speakers
or
headphones
are freely varied
without
affecting
the level of the
recording.
ENGLISH
6
Publicidad
