Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Auto Operation
ON
During Auto Operation:(Cooling model)
❏ You can switch the indoor fan speed.
❏ If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must
set the mode and the desired temperature again.
During Auto Operation:(Heat pump model)
❏ You can switch the indoor fan speed.
❏ The system will automatically switch from the cooling mode to the heating mode as the room temperature
and set temperature.
12 LG Ceiling Suspended Air Conditioner
1
Press the Start/Stop button.
The unit will respond with
a beep.
2
Open the door on the remote control. To select Auto
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
Cooling
The temperature and fan speed are automatically set by the
3
electronic controls based on the actual room temperature. If
you want to change the set temperature, press the Room
Temperature Setting buttons. The cooler or warmer you feel,
the more times (up to two times) you should press the button.
The set temperature will be changed automatically.
Auto
Healthy
Dehumidification
To raise the temperature
To lower the temperature
Heating
(Heat pump model only)
Publicidad
