Maytag MGC6430 Guia Del Usuario página 7

&
BURNER CAPS AND SEALED
GAS BURNERS
RemovableBurner Cape
II Allowburnerto cool.Removeburnercap
and wash in soapy water with a plastic
scouring pad. For stubborn soils, clean
with a soap-filled, nonabrasivepad or
Cooktop Cleaning Creme (Part
#20000001)** a nd a sponge.
II Do not cleanin dishwasheror self-clean-
ing oven.
SealedGas Burner
| Clean frequently.Allow burner to cool.
Cleanwithsoapand plasticscouringpad.
Forstubborn soils,cleanwitha soap-filled,
nonabrasive pad.
II Be carefulnotto getwater intothecenter
of the burner.
| Use carewhencleaningthe ignitor.If the
ignitor is wet or damaged the surface
burnerwill notlight.
| Toensureevencookingperformance, keep
burnerportsfree of foodsoils/debris.
BURNER GRATES- PORCELAIN
ON CAST IRON
Washgrateswith warm,soapywaterand
a nonabrasive, plasticscrubbingpad.For
stubbornsoils, clean with a soap-filled,
nonabrasive pad or Cooktop Cleaning
Creme(Part#20000001)** a nda sponge.
If soilremains,reapplyCooktopCleaning
Creme,cover with a damp paper towel
and soak for 30 minutes.Scrub again,
rinseand dry.
Do notcleanin dishwasheror self-clean-
ing oven.
CONTROL KNOBS
| Removeknobs in the OFF position by
pullingup.
II Wash,rinseand dry.Do notuseabrasive
cleaningagentsas they may scratchthe
finish.
| Turnon eachburnerto be surethe knobs
havebeencorrectlyreplaced.
DRIP BOWLS - PORCELAIN
Porcelainmaydiscolor orcrazeifoverheated.
This is normal and will not affect cooking
performance.
_-- When cool, wash after each use, rinse
and dryto preventstainingor discolora-
tion. May be washed in the dishwasher.
> To clean heavy soil, soak in hot sudsy
water, then use a mild abrasivecleaner
such as Soft Scrub*and a plasticscour-
ing pad.
_-- Forburnedonsoil, removefromcooktop,
placeon newspapers andcarefullyspray
with commercialoven cleaner. (Do not
spray surrounding surfaces.) Place in
plastic bag and allow to soak several
hours. Wearing rubber gloves, remove
from bag,wash, rinseand dry.
GLASS-SURFACE
> Cleanafter eachuse.
> Allow surfaceto cool.
> Avoid usingexcessiveamountsof water
which may seep under or behind glass
causing staining.
_-- Wash with soap and water. Rinse with
clear water and dry. Glass cleanercan
be used if sprayedon a cloth first.
_-- Do not use abrasive materialssuch as
scouring pads, steel wool or powdered
cleanersas they will scratchglass.
SURFACE BURNER FAILS TO LIGHT.
II Checkto be sureplug is securelyinserted
into receptacle.
II Checkor re-setcircuit breaker. Checkor
replacefuse.
II Checkpowersupply.
II Checkto be sure burner is correctlyrated
for your kindof gas.
II Checkto be sure burner ports or ignition
ports are not clogged.
II Checkto be sureignitorisdryand clicking.
Burnerwill not light if ignitor is damaged,
soiled or wet. If ignitor doesn't click, turn
controlknob OFF.
II Checkto be sure burnercap is correctly
seatedon the burner base.
SURFACEBURNERFLAME LIFTS
OFF PORTS.
II Check to be sure a pan is sitting on the
grateabove.
II Contactan authorizedMaytagservicer.
THE FLAME IS UNEVEN.
II Burnerports may be clogged.
II Flame may needto be adjusted.Contact
an authorizedMaytagservicer.
SURFACE BURNER FLAME IS
YELLOW IN COLOR.
II Contactan authorizedMaytagservicer.
II Someyellowtips on the flameare accept-
able when usingLP gas.
* Brand namesare registeredtrademarksof the respectivemanufacturers.
** To order call 1-800-688-8408.