Küschall K Serie Manual Del Usuario página 31

Front side tie-down positions for belt straps:
1. Attach the front straps above the castor supporters as shown
in the two figures above (see location of the attachment
labels).
2. Attach front straps to the rail system referring to best practice
recommended instructions from the safety belt manufacturer.
3. Release parking brakes and apply tension front straps by
pulling the wheelchair backwards from the rear.
4. Re-apply parking brakes.
1583571-A
Rear side tie-down positions for snap hooks:
1. Attach the snap hooks to the axle right next to the axle
holders as shown in the two figures above (see location of
the attachment labels).
2. Attach rear straps to the rail system referring to best practice
recommended instructions from the safety belt manufacturer.
3. Tighten the straps.
Transport
31