Portable installation (on a surface/table)
Place the unit on a flat and stable surface, make sure that the area in front is
clean and dust-free.
USE
Before each use, verify that the unit is in good condition, the electric cord is not
damaged, if the power cord is damaged, it must be replaced by the manufacturer
or a competent qualified electrician or a person with similar qualifications, in
order to avoid any risk.
The fan can be manually adjusted up and down by the air grating and
according to his inclination.
Verify that the switch is in pos.off, then insert the plug of the fan in the
power supply.
Select the desired speed with the selector.
1 – Minimum speed 2 – Medium speed 3 – Maximum speed
To turn the fan off, press the "0" key and then remove the plug from the socket.
When not in use for long periods, the plug must always be removed from the
socket.
CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.
Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive
products.
Do not immerse any part of the fan in water or other liquid: if this should happen,
do not put your hand in the liquid, but first remove the plug from the socket.
Carefully dry the appliance and make sure that all the electrical parts are dry: in
the case of doubt, ask for professionally qualified help.
It is essential that the motor's air holes be kept from dust and lint.
If the fan will not be used for long periods, it must be protected from dust and
humidity; we recommend storing it in its original packaging.
Should you decide not to use the appliance any more, we recommend making it
inoperative by cutting the power cord (after making sure you have disconnected
the plug from the socket) and make dangerous parts harmless if children are
allowed to play with them (such as the blade).
12