Learning Steering Remote Control - JVC KD-T915BTS Manual De Instrucciones

Receptor con cd
Ocultar thumbs Ver también para KD-T915BTS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Display Settings
[COLOR] (for KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS)
[PRESET]
Selects illumination colors for the buttons on different zones separately.
1 Select a zone ([ZONE 1], [ZONE 2], [ALL ZONE]). (See the illustration on
page 35.)
2 Select a color for the selected zone.
• [COLOR 01] to [COLOR 49]
• [USER]: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• [COLOR FLOW01] to [COLOR FLOW03]: Color changes at different
speeds.
• [CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/[RELAX]/
[SUNSET]: The selected color pattern is shown.* (Selectable only when
[ALL ZONE] is selected in step 1.)
[DAY COLOR]
Stores your own day and night illumination colors for different zones.
1 Select a zone ([ZONE 1], [ZONE 2]). (See the illustration on page 35.)
2 [RED]/[GREEN]/[BLUE]: Select a primary color.
3 [00] to [31]: Select the level.
Repeat step 2 and step 3 for all the primary colors.
[NIGHT COLOR]
• Your setting is stored to [USER] in [PRESET].
• [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your
car's headlights.
[COLOR GUIDE]
[ON]: The illumination color of [ZONE 1] and [ZONE 2] change to white
color when settings are performed on menu and list search, except in color
setting mode. ; [OFF]: Cancels.
* If one of these color patterns is selected, the [ZONE 1] and [ZONE 2] illumination colors will
change to the default colors.
36
ENGLISH

Learning Steering Remote Control

(for KD-T711BT)
You can control the unit with the steering remote control keys on your
vehicle. After connection, you can configure the control keys according to
your preference.
• You can only make this configuration if your vehicle is equipped with the
electrical steering remote control.
• If the steering remote control in your car is not compatible, configuration
may not be completed and an error message may appear. (Page 41)
Make the connection
Steering remote cable
(supplied)
Learning steering remote
input terminal
Rear panel
Configure the control keys
1
Press and hold
.
2
Turn the volume knob to select [SYSTEM], then press the knob.
3
Turn the volume knob to select [USER S.REMO], then press the knob.
4
Turn the volume knob to select [SET KEY], then press the knob.
A key list of 16 assignable keys appears.
• K## NONE: No function has been assigned.
5
Turn the volume knob to select any key from the key list to assign the
function, then press the knob.
"PRESS KEY TO ASSIGN K##" appears.
Bright green/red
Purple/red
Gray/red
Connect to your vehicle's steering remote
harness. Contact your JVC dealer for details.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido