Publicidad
Idiomas disponibles
Idiomas disponibles
5
Dry Level
Press the button to select the dryness level. Different dryness level will
result in different drying time. For clothes to be ironed manually, a lower
dryness level should be selected.
6
Control lock
Press and hold the Dry Level and Time Dry at the same time for three
seconds to turn on the Control Lock function. All buttons except Power
will not work when the control lock is activated.
Press and hold again for another three seconds to turn off the function.
Your selection will be kept until next pressing.
Time Dry
7
This button is a quick selection for Time Dry setting.
8
Damp Dry Signal
Press and hold Time Adjust+ button for three seconds to turn on the
Damp Dry Signal function.
Press and hold again for another three seconds to turn off the function.
This function is useful when you want to take some garments out for
ironing. The unit will beep 8 times when the moisture in the clothes is
good for ironing. At this time, you can take those garments out and
continue drying the other by pressing the START/PAUSE button once.
NOTE: The unit will not stop operating if you don't take those
garments out for ironing.
Time Adjust+\-
9
Press these buttons repeatedly to adjust the drying time for Manual
cycles. (These buttons do not work for Sensor cycles.)
SIGNAL
10
Press
and hold Time Adjust- button for three seconds
buzzer sound.
Press
and hold Time Adjust- button
Your selection will be kept until next pressing.
Digital display
11
This digital will display the time of cycle you are setting or remaining
time of cycle operating.
Cycle status display
12
The relative indicator Light will be flash when the dryer is in its drying
program, other process indicators to be executed are lit.
34
again to activate the sound.
to turn off the
Publicidad
