4) Drill the marked holes with a 5-mm drill.
5) Push the supplied wall plugs
6) Screw the wall bracket
7) Connect the mains adapter
Getting started
Information about the battery
♦
The vacuum cleaner is powered by a rechargeable, replaceable lithium-ion
battery. Before using the vacuum cleaner for the first time, the battery
must be charged for around 6 hours.
♦
To care for the battery
Disconnect the mains adapter
is charged.
Note
►
The appliance is equipped with a temperature monitor to protect the battery
At high ambient temperatures, the charging process may be interrupted or
the appliance may switch off automatically in rare cases:
–
The battery indicator
Charging is interrupted and automatically resumed as soon as the
temperature of the appliance has dropped.
–
The battery indicator
operation. The appliance switches off automatically. Allow the appliance
to cool down for about 20-30 minutes before switching it on again.
│
GB │ MT
■
102
z
into the holes.
i
in place using the screws
0
to a mains socket.
2
, we recommend the following:
0
from the mains socket after the battery
j
flashes at one second intervals during charging.
j
flashes five times at one second intervals during
t
provided.
2
2
2
SHAZ 22.2 F7
.