Oase AquaMax Eco Classic Serie Puesta En Marcha página 19

Switching the wireless connection on/off
Proceed as follows
Press and hold the button for longer
than 10 s.
Connecting the controller to the smart phone/tablet
The maximum distance for interference-free communication between the controller and
smartphone/tablet depends on the transmission power of the smartphone/tablet. Brick walls,
walls made of reinforced concrete, large metal objects or bushes and trees can dampen radio
waves and decrease the distance.
Proceed as follows
1. Download and install the OASE App "Easy Switch"
to the smartphone/tablet.
2. If you have not already done so, switch on the
wireless connection at the controller.
3. Activate the Bluetooth feature on the
smartphone/tablet.
4. Start the App "Easy Switch" .
5. Select your pump from the list.
6. Enter the authentication code in the
smartphone/tablet.
Information
• If boF appears in the display, the wireless connec-
tion is switched off.
• If bon appears in the display, the wireless connec-
tion is switched on.
− The LED in the display lights up when the wire-
less connection is switched on.
− The LED in the display blinks when connected to
the OASE App.
− (→ Controller overview)
• When the unit is delivered, the wireless connec-
tion is switched on.
After 15 s without operation the controller automati-
cally switches to "Power / W"mode.
Information
The OASE App is available on iOS (App Store) and An-
droid (Play Store).
(→ Switching the wireless connection on/off)
–
After a brief search, a list of available products will
appear.
An authentication code will be displayed on the con-
troller for two minutes.
Upon successful connection, the display will change
to the operating instruction page for the pump.
• Now, the pump can be controlled via the
smartphone/tablet.
• The LED in the controller display blinks.
(→ Controller overview)
EN
19