Anest Iwata AIRREX Katana Plus Guía De Usuario página 9

6. Wait
It is important to follow material's manufacturer guidelines on dry times and applying additional
coats. Apply additional coats as directed until desired finish is achieved.
REMEMBER
• ALWAYS brush the air cap o periodically using the cleaning brush throughout the
painting process to keep it free of paint build up.
• NEVER remove the needle while there is paint in your cup as doing so will allow paint to
leak from the spray gun.
• ALWAYS have fun with it!
Just like any tool, you want to get familiar and comfortable with your spray gun. Once you do,
you'll find this tool an essential addition to your arsenal and a great way to save time and materi-
als on all kinds of projects while getting a beautiful, smooth finish.
CLEANING AND MAINTENANCE
Release all air pressure and disconnect spray gun from air source before disassembling, or
servicing the spray gun.
The tip of the fluid needle and nozzle have sharp points. Avoid touching these during
maintenance to prevent injury.
Never use a cleaner with a PH level below 6.0 or above 8.0.
Never use any cleaning products that contain the following chemicals:
• DICHLOROMETHANOL
• AMMONIUM BIFLORIDE
• HYDROGEN PEROXIDE 130 vol.
• NITRIC ACID
• TRIPOTASSIUM HEXACYANOFERRATE
Never submerge the spray gun body in any liquid or cleaning products.
Never submerge any spray gun components in an liquid or cleaner for longer than
a few seconds.
Customer Support 503-253-7308 M-F, 8am-4:30pm PST | iwata.support@iwata-medea.com | www.iwata-airbrush.com/blog/contact-us
WARNING
www.Iwata-Airbrush.com/KatanaPlus.html
KAT9000 | Katana Plus HVLP Spray Gun
9