To stop play and eject the disc
Press 0.
Playback stops and the control panel flips down.
The disc automatically ejects from the loading
slot.
To change the display information
While playing back an MP3/WMA
file, you can change the disc
information shown on the display.
Press DISP (display) repeatedly.
Each time you press the button,
the display changes to show the
following:
• When "TAG DISP" is set to "TAG
ON" (initial setting: see page 28)
Album name / performer
(folder name*)
(TAG
lights up on the display)
Track title (file name*)
(TAG
lights up on the display)
Elapsed playing time and
Current file number
Clock and current
* If ID3 tags are not recorded, folder name and
file name appear. In this case, the TAG indicator
will not lights up on the display.
• When "TAG DISP" is set to "TAG
OFF"
Folder name
( lights up on the display)
( lights up on the display)
Elapsed playing time and
Current file number
Clock and current
file number
file number
File name
Note:
• The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also "To select the scroll mode—SCROLL" on
page 28.
• When folder or file name is shown, current folder
number or the
indicator and current file number
also appear on the right side of the display.
Locating a file or particular
portion on a disc
To fast-forward or reverse the file
Press and hold ¢
while playing a disc, to
fast-forward the file.
Press and hold 4
reverse the file.
Note:
During this operation, you can only hear intermittent
sounds. (The elapsed playing time also changes
intermittently on the display.)
To skip to the next or previous files
Press 4
briefly, while playing, to skip back
to the beginning of the current file.
Each time you press the button consecutively,
the beginning of the previous files is located and
played back.
while playing a disc, to
Press ¢
briefly
while playing, to skip
ahead to the beginning of
the next file.
Each time you press the
button consecutively, the
beginning of the next files
is located and played
back.
19