External Component Operations; Playing An External Component - JVC KD-AR600 Manual De Instrucciones

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See "To select the external component to
use—EXT IN" on page 28.
1
Select the external component
(LINE IN).
• If "LINE IN"* does not appear on the display,
see page 28 and select the external input
("LINE IN").
* Displayed only when one of the following
sources is selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press
on the power.
7
CD LINE IN*
to turn
(0nly for KD-AR600)
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 23 and 24.)
To use the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate volume).
37