en - Opening and closing the door
Opening the door
The door can only be opened if the com-
mercial dishwasher is connected to the
electrical supply and is switched on (the
LED in the button is lit up).
The control panel for the commercial dish-
washer also serves as a door handle.
Press the button to open the door. The
LED in the button goes out as soon as the
door is unlocked.
Grasp the handle underneath the control
panel and lower the door to open.
Pressing the button during operation
can interrupt the programme.
A programme which is already running
should only be interrupted if strictly ne-
cessary, e.g. if the load is moving signific-
antly.
32
Closing the door
Push the baskets right in.
Raise the door upwards and push it gently
until the catch audibly engages. The door
will be drawn automatically into its final
closed position by the closing mechan-
ism.
Danger of squashing fingers due to
the door closing
There is a danger of squashing fingers
when the door is drawn into its final
closed position.
Do not put your hand inside the door as it
is closing.
If the door cannot be closed properly by the
mechanism because it is obstructed by
crockery or other similar objects,
blocked
F 433
or
will appear in the display
and the mechanism will open.
Remove the obstruction from the door
closing area.
The dishwasher can only remain leak-
proof if the automatic closing mechanism
has drawn the door into the final closed
position.
Be sure not to use too much force when
closing the door, as the comfort door
locking mechanism will open it again.
Door