Switching On; Selecting A Programme - Miele professional PG 8057 TD Instrucciones De Uso Abreviadas

Ocultar thumbs Ver también para PG 8057 TD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41

Switching on

Switch on the water supply if it is off.
Press the  button until the button's LED
lights up.
Close the door (the LED on the  button
will light up).
As soon as the commercial dishwasher is
ready for operation, the display message
changes to show the last selected pro-
gramme,
e.g.:
Universal
Temperature
Duration

Selecting a programme

Choose your programme according to the
type of load and how dirty it is.
Direct-access pushbuttons
The most regularly used programmes can
be selected via direct-access pushbuttons
,  or . The buttons can be freely
customised to suit individual needs (see
"Additional Settings").
The first three programmes from the Pro-
gramme overview are allocated to the dir-
ect-access pushbuttons as the factory de-
fault.
Select a programme using the direct-ac-
cess pushbuttons.
The direct-access pushbutton's LED will
light up and the Start/Stop button's LED will
flash.
G
55 °C
23
Min
Programme list
Programmes which cannot be selected via
the direct-access pushbuttons can be se-
lected from the programme list.
Press the  button.
The following options menu appears in the
display:
Select programme
Beer glasses
Short
Select the programme you want using the
 and  buttons and confirm your choice
using the OK button.
The selected programme will be shown in
the display, e.g.:
Universal
Temperature
Duration
The  button's LED will light up and the
Start/Stop button's LED will flash.
en - Operation
;
,
G
55 °C
23
Min
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pg 8057 td dosPg 8058Pg 8058 dosPg 8059Pg 8059 dosPg 8099 ... Mostrar todo

Tabla de contenido