AFG 3.3AE Manual Del Propietário página 19

ASSEMBLY STEP 9
7
17
16
6
3.3AE HANDLEBAR
19
18
20
5.3AE/7.3AE
HANDLEBAR
11
NOTE: All hardware for this step is pre-installed.
A Remove 4 PRE-INSTALLED BOLTS (16) from the CONSOLE (17).
B Attach the CONSOLE CABLES (7) to the
CONSOLE (17).
C Carefully tuck the CONSOLE CABLES (7) into the CONSOLE
MAST (6) before attaching the CONSOLE. Attach CONSOLE (17) to
CONSOLE MAST (6) using 4 PRE-INSTALLED BOLTS (16).
D Slide the HANDLEBAR BOOT (18) halfway up the UPPER
HANDLEBAR (19). Slide the UPPER HANDLEBAR (19) onto the
LOWER HANDLEBAR (11) making sure handlebars are joined
NOTE: Do not to pinch any wires while attaching the console.
together completely. Secure the UPPER HANDLEBAR (19) to the
LOWER HANDLEBAR (11) using PRE-ATTACHED SET SCREWS
(20).
E Repeat STEP D on other side.
NOTE: Make sure upper handlebars are as far down as
possible. Handlebars can be damaged If not secured correctly.
ASSEMBLY COMPLETE!
19